OLK1121 - Quartz Slab Eco-Friendly And Healthy Applied To Cabinets
Description:
1. can be custom-made to specific sizes, shapes, and colors to meet diverse design requirements
2. innovative design possibilities in architecture and interior design
3. can be cut, polished and other processing according to demand
4. making it environmentally friendly and safe for human health
5. makes it simple to clean and maintain its aesthetic appeal
Quick Detail:
The typical manufacturing process for engineered stone involves the following key steps:
-
Raw Material Preparation:
- The primary raw materials used include quartz sand, resins (polyester or acrylic), and mineral fillers such as pigments and additives.
- These raw materials are carefully weighed and mixed in precise proportions to achieve the desired physical and aesthetic properties.
-
Mixing and Compaction:
- The blended raw materials are fed into a large mixing machine, where they are thoroughly combined to form a homogeneous compound.
- The mixture is then transferred to a vibration table or mold, where it undergoes high-pressure compaction to remove air pockets and increase the density of the material.
-
Curing and Finishing:
- The compacted slab is placed in a curing oven or chamber, where it is subjected to heat and/or UV radiation to initiate the curing or hardening process of the resin binder.
- Once cured, the slab is removed and undergoes various finishing steps, such as polishing, grinding, and edge profiling, to achieve the desired surface texture and appearance.
-
Quality Inspection and Packaging:
- The finished engineered stone slabs are carefully inspected for any defects or inconsistencies.
- The approved slabs are then cut to size, if necessary, and packaged for transportation and distribution.
Specification:
Technical Data
| Technical Specifications* |
| TEST PERFORMED |
TEST PROCEDURE |
TEST RESULTS |
| Specific Gravity |
ASTM C97 |
2.45gr/cm |
| Mohs Hardness |
BS 6431 |
6-7 Mohs |
| Impact Resistance |
|
15-25cm for 1.2cm products |
| |
TS EN 14617-9 |
35-60cm for 2cm products |
| |
|
80-175cm for 3cm products |
| Flexural Strength |
TS EN 14617-2 |
40-70 N/m ㎡ |
| |
ASTM C880 |
6301 psi |
| Abrasion Resistance |
TS EN 14617-4 |
140-175mm |
| Water Absorption |
TS EN 14617-1 |
0.1% |
| |
BS 6431-11 |
0.1% |
| Flame Spread |
ASTM E-84 |
Class A |
| Chemical Resistance |
ASTM D2299 |
Only strong acids amd bases may alfect |
| |
BS 6431-18 |
|
| Resistance to Freeze and |
ASTM C1026 |
No change |
| Thaw Cycling |
|
|
| Modulus of Rupture |
BS 6431-12 |
52.4 N/mm ㎡ |
| Thermal Shock Resistance |
ASTM-C484 |
No visible defects |
| Wheathering |
ASTM G23 |
No visible changes after 100 hours |
| *Test results may vary according to product properties. |
Advantage:
Artificial stone is a new type of environmental protection composite material, compared with traditional building materials such as stainless steel and ceramics, artificial stone has diverse functions, rich colors and a wider range of applications.
The solid surface material of artificial stone is combined with resin and aluminum hydroxide in a special process, which releases water molecules in the case of high temperature and heat, and has the function of flame retardant and heat absorption.
Tested by the national authority, the ingredients contained are non-toxic, harmless, non-radioactive, environmental protection and health, and are truly green and safe.
Compared with other building materials, the toughness of the solid surface material of artificial stone is better, it is not easy to break, and the whole is dense without holes, leaving no chance for bacteria to multiply, touching the skin is warm, not easy to wear, hide dirt, decay and other advantages, it is an economic and durable good product.
Product Tags:
|
|
Eco Friendly Quartz Slab 3200x1600mm Quartz Kitchen Countertops Images
|
